点击图片查看大图双效一体式磁悬浮Double Effect Integral Magnetic Bearing Chiller
机组介绍 Product Introduction:
1. 不锈钢水箱----使用寿命长，带冷却水循环，水位报警及补水作用。
Stainless steel water tank, longer service life, with cooling water circulation, water level alarm and hydration.
2. 微板降膜蒸发冷凝器----纳米防腐亲水涂层，彻底杜绝换热器表面被氧化腐蚀，保证水膜均匀，提高换热效率。
Micro-plate falling film evaporative condenser--Nano anti-corrosion hydrophilic coating, completely prevent the surface of the heat exchanger from being oxidized and corroded, ensuring uniform water so as to improves heat transfer efficiency.
3. 进风导流过滤装置---过滤空气保证水系统清洁度，优化进风气流组织，使水膜均匀布满换热器表面。
Inlet air diversion filter device---clean air ensure the cleanliness water system, optimize the air flow organization, so that the film evenly covers the surface of the heat exchanger.
4. 变频磁悬浮压缩机---磁悬浮轴承无需机械摩擦，无需润滑油，噪音降低至73dBA, 直流变频永磁电机启动电流2A, 转速4800RMP, 调速范围宽控温更加精准。
Variable frequency magnetic bearing compressor--magnetic bearing without mechanical friction, no lubricating oil, noise as low as 74dBA, DC variable frequency permanent magnet motor start electrophoresis 2A, speed 48000RMP, wide temperature control range is more accurate.
低冷凝温度，高效制冷 Low condensing temperature, high efficient cooling
一体化集成设计 Integral design
磁悬浮压缩机 Magnetic bearing chiller
节能50%以上 Energy saving more than 50%
启动电流仅需 2A Starting current only 2A
远程控制 Remote control
产品特点Product Characteristic
一体化设计，全工况配载，整体式制造，经过多项国标级检测项目合格后出厂，充分保证了机组的最佳运行状态:
Machine with integral design, all conditions and integral manufacturing, qualified by global inspection items, fully guaranteed by the best running status of the unit
一步到位 Step System:
磁悬浮压缩机+蒸发式冷凝器+蒸发器+冷却水泵+水管路+安装配件+控制系统
Magnetic Bearing Compressor + Evaporative Condenser + Evaporator + Cooling Water Pump + Water Pipe Line + Installation Accessories + Control System
蒸发冷中央控制系统特点 Evaporative condensation central control system features
1. 主机采用蒸发冷磁悬浮机组，机组包含原有冷水机组+水泵+冷却塔相关功能，结构紧凑，体积小，无需专有制冷主机房，放置菇房外空置区域即可。
The main engine adopts the evaporative condensation magnetic bearing chiller. The machine includes chiller+water pump+cooling tower and other related functions. The structure is compact and the volume is small. There is no need for a dedicated machine room, it can be installed outside the room.
2. 节省原冷冻系统主管路，减少管路过长带来的冷量损失，冷冻水系统采用PVC给水管，导热系数低，保温效果好，阻力损失小。
Save the main pipeline of the original refrigeration system and reduce the loss of cooling capacity caused by the long pipeline. The chilled water system uses PVC water supply pipe with low thermal conductivity, good thermal insulation effect and low resistance loss.
3. 减少冷冻水泵杨程，水泵功率降低20%-30%左右，可降低水泵运行车成本。
Reduce the head of the chilled water pump, and reduce the power of the pump by 20%-30%, which can reduce the running cost of the pump.
4. 相邻小型中央控制主机设备可直接通过并联管路进行系统互为备用。
Adjacent small central control main machine directly use the parallel pipeline for standby.
